# RS-LL-X1 Therapy Robot
## Configuration Instructions
| ①RGB-D Depth Camera | ②High Precision Force Sensor | ③Quick-Release Therapy Button K001 | ④Thermal Radio Frequency Therapy Device R001 |
| :------------------- | -------------------------- | ----------------------------------- | ------------------------------------------- |
| ⑤Emergency Stop Button 1 | ⑥Emergency Stop Button 2 | ⑦Power Button / Indicator Light | ⑧Universal Serial Interface |
| ⑨USB Omnidirectional Microphone Speaker | ⑩Status Indicator Light | ⑪All-Plastic Medical Double-Wheel Brake | ⑫Multi-Function Control Panel |
## Installation Instructions
- Recommended bed height: 65cm
- Distance between bed and robot: approximately 10cm (one fist distance)
- The cervical spine should be kept under the robot
## Operation Steps
### 1. Start the Machine
1. Make sure the emergency stop button is pulled up.
2. Long press the power button / indicator light for three seconds, wait two seconds, and then press once briefly. The green light will flash, indicating startup. The green light stays on when the machine is ready. If the red light is steady, ensure safety and unlock the emergency stop button.
3. Ensure the tablet and robot are on the same WiFi network.
4. Open the StormX software.
5. Select the machine to control (ip-LL-X-jsfb-XXXXXX, where xxxxxx is the machine serial number).